This device is NOT RECOMMENDED for future use with pacmanx.com due lớn low flash/ram.

Bạn đang xem:

DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend lớn flash an up-to-date & secure pacmanx.com version (18.06 or later) onlớn it! See 4/32 warning for details.

1) This device does not have sầu sufficient resources (flash and/or RAM) khổng lồ provide secure & reliable operation.This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See pacmanx.com on 4/32 devices what you can do now.

2) pacmanx.com support for this device will over after 2019.19.07 will be the last official build for 4/32 devices. After 19.07, no further pacmanx.com images will be built for 4/32 devices. See pacmanx.com on 4/32 devices what you can vì now.


Note1: The TL-WR841N is identical except that the antennas are not detachable. TP-Link naming scheme is, that devices ending in a D have detachable antennas.Note2: v5.2, v5.4 etc. are all v5, similarly for v7, v8, v9. The only difference is the firmware version they come with.


Sometimes, version x. is only available in the PRC & version y. is intended for sale world-wide. The hardware between version x. và version y. can differ significantly but does not have lớn.
Sometimes, there is Version x. for PRC only and Version x. for world-wide sale. If there is a special chinese-Version with the same major-number, then that version has usually significantly different hardware

Community builds


pacmanx.com 19.07 ath79 tiny, including LuCI, see this forum thread.


Over 500 days

The TP-Link TL-WRN841N(D) running over 500 days on an Enterprise Level

https://www.dropbox.com/s/lfi35i2toc1iwhv/lede524days.png?dl=0


Version v3 v5 v7 v8 v9 v10 v11 v12 v13 v14
Instruction set: MIPS
Vendor: Atheros MediaTek
bootloader: uboot
System-On-Chip: AR9130 AR7240 rev 2 AR7241-AH1A AR9341 QCA9533-AL3A QCA9533-BL3A QCA9533-AL3A MT7628NN
cpu Frq: 400 MHz 535 MHz 550 MHz 650 MHz 575 MHz
BogoMIPS: 265.42 265.42 265.42 266.64 366.18 432.53 385.84 385.84
Flash-Chip: ST 25P32V6P Hynix Eon EN25F32-100HIPhường Spansion FL032PIF Winbond 25Q32FVS1G Spansion FL032PIF GigaDevice 25Q64CSIG GigaDevice 25Q32CSIG
Flash size: 4 MiB 8 MiB 4 MiB
RAM-Chip: Hynix HY5DU561622FTP-5 Zentel A3S56D40ETP-G5 ESMT M13S2561616A-5T Winbond W9425G6JH-5 Zentel A3S56D40GTP-50 Zentel A3S56D40GTP-50L ESMT M14D5121632A -2.5B / Winbond W9751G6KB-25 Zentel A3S56D40GTP-50L
RAM size: 32 MiB 64 MiB 32 MiB
Wireless: Atheros AR9100 Rev:7 Atheros AR9280 Rev:2 Atheros AR9287-BL1A 2.4GHz 802.11bgn AR9341 QCA9533-AL3A QCA9533-BL3A QCA9533-AL3A MT7628NN
switch: Marvell 88E6060 AR7240 built-in AR7241 built-in AR9341 built-in QCA9533-AL3A built-in QCA9533-BL3A built-in MT7628NN built-in
USB: 1.1 thủ thuật 2.0 gian lận 2.0 hack No No 2.0 thủ thuật No
Serial: Yes Remove R26 Remove sầu R26 & bridge R23 Yes
JTAG: Yes Yes No

The port indexes in pacmanx.com & in hardware (on the case) are mangled (at least in Barrier Breaker):


It is possible to run 802.1Q tags on these ports. As of Chaos Calmer mixed (tagged/untagged) VLANs are working, and can be configured via LUCI.The maximum VLAN number is 15

eth1 is directly connected khổng lồ the WAN port.

Xem thêm: Bán Xe Khách 45 Chỗ Bluesky Thaco Đời 2020, Universe 45 Chỗ


Model↓ VersionCurrent Relpacmanx.com Install Imagepacmanx.com Upgrade Image
TL-WR841N(D)1, 1.518.06.9http://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v1.5-squashfs-factory.binhttp://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v1.5-squashfs-systăng cấp.bin
TL-WR841N(D)v1018.06.9http://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v10-squashfs-factory.binhttp://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v10-squashfs-sysupgrade.bin
TL-WR841N(D)v1118.06.9http://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v11-squashfs-factory.binhttp://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v11-squashfs-sysupgrade.bin
TL-WR841N(D)v1218.06.9http://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v12-squashfs-factory.binhttp://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v12-squashfs-sysupgrade.bin
TL-WR841Nv1319.07.7http://downloads.pacmanx.com/releases/19.07.7/targets/ramips/mt76x8/pacmanx.com-19.07.7-ramips-mt76x8-tl-wr841n-v13-squashfs-tftp-recovery.binhttp://downloads.pacmanx.com/releases/19.07.7/targets/ramips/mt76x8/pacmanx.com-19.07.7-ramips-mt76x8-tl-wr841n-v13-squashfs-sysupgrade.bin
TL-WR841Nv14snapshot
TL-WR841N(D)v318.06.9http://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v3-squashfs-factory.binhttp://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v3-squashfs-systăng cấp.bin
TL-WR841N(D)v518.06.9http://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v5-squashfs-factory.binhttp://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v5-squashfs-sysnâng cấp.bin
TL-WR841N(D)v718.06.9http://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v7-squashfs-factory.binhttp://downloads.pacmanx.com/releases/18.06.9/targets/ar71xx/tiny/pacmanx.com-18.06.9-ar71xx-tiny-tl-wr841-v7-squashfs-systăng cấp.bin
TL-WR841N(D)v817.01.7http://downloads.pacmanx.com/releases/17.01.7/targets/ar71xx/generic/lede-17.01.7-ar71xx-generic-tl-wr841-v8-squashfs-factory.binhttp://downloads.pacmanx.com/releases/17.01.7/targets/ar71xx/generic/lede-17.01.7-ar71xx-generic-tl-wr841-v8-squashfs-sysnâng cấp.bin
TL-WR841N(D)v918.06.8http://downloads.pacmanx.com/releases/18.06.8/targets/ar71xx/tiny/pacmanx.com-18.06.8-ar71xx-tiny-tl-wr841-v9-squashfs-factory.binhttp://downloads.pacmanx.com/releases/18.06.8/targets/ar71xx/tiny/pacmanx.com-18.06.8-ar71xx-tiny-tl-wr841-v9-squashfs-sysupgrade.bin

For DD(trunk) there is a change going on to lớn remove the “N” và “ND”-suffix from the imagename (only “-tl-wr841-v10.bin”).

Installing via web interface:


Log in lớn router website interface and select the firmware image you just uploaded as an update.
Sit and wait while it flashes. It will reboot & be accessible at 192.168.1.1.

The Barrier Breaker image already includes a GUI, you vì not have sầu to lớn install it manually.

*
Note: Newest version of tp liên kết firmware (tested on TL-WR841N_V9_150310 / 3.16.9) does not accept pacmanx.com firmware filename, because they are too long ; rename it to something GUI), only telnet & ssh access. You can install GUI, for details see: luci.essentials, but before install LuCI (GUI) you need to configure your router to have access khổng lồ mạng internet, for configuration see: mạng internet.connection


For v8...v13 TFTP install is much easier

Beware that this installation method needs a TTL cấp độ serial console usb khổng lồ TTL lượt thích DKU-5 data cable or RS232-TTL màn chơi shifter like this:

*
and a working TFTP hệ thống & should not be attempted unless you have sầu experience with this sort of thing or are eager khổng lồ learn.

This is taken more or less verbatlặng from https://forums.pacmanx.com/viewtopic.php?id=24203, thanks khổng lồ dl3daz.


Hook up the serial console as explained in the section “serial console”. At the prompt “Autobooting in 1 seconds” type “tpl” quickly khổng lồ start a uboot console.
Now we need to mix router & hệ thống IPhường addresses (here named ROUTERIP. & SERVERIP, substitute these with the real IP addresses).

Type in the console:

setenv ipaddr ROUTERIPsetenv serverip SERVERIPprintenvFor example: Configure this static ip for your LAN thẻ 192.168.1.100. If your computer containing other LAN or Wifi thẻ, disable it!

Type in the console

setenv ipaddr 192.168.1.111setenv serverip 192.168.1.100192.168.1.111 is the router ip, 192.168.1.100 is the TFTP hệ thống ip.


Uboot needs the tftp VPS lớn be listening on port 69. Make sure your VPS is configured khổng lồ listen khổng lồ that port. Now we can load the firmware over TFTP. with “tftpboot 0x80000000 pacmanx.com-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin”:

ar7240> tftpboot 0x80000000 pacmanx.com-ar71xx-generic-tl-wr841n-v8-squashfs-factory.binUsing eth0 deviceTFTPhường from server 192.168.1.100; our IP address is 192.168.1.111Filename 'pacmanx.com-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin'.Load address: 0x80000000Loading: checksum bad################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################doneBytes transferred = 3932160 (3c0000 hex)
lưu ý the “3c0000” in the last line (your number may differ). Now exeđáng yêu the following commands, if necessary replacing 3c0000 with the number you got from tftpboot
Type:

printenv bootcmdTake note of the address and use it as flash erase start address.

For TL-WR841ND v3:

1. Erase the flash:

ar7100> erase 0xbf020000 +0x3c0000 First 0x2 last 0x3d sector form size 0x10000 61 Erased 60 sectors 2.Copy RAM nội dung lớn flash:

ar7100> cp.b 0x80000000 0xbf020000 0x3c0000 Copy to lớn Flash... write addr: bf020000 done 3.Reset

ar7100> reset Resetting...4. Done.

For TL-WR841ND v5, v7, v8, v9:

1. Erase the flash:

wasp> erase 0x9f020000 +0x3c00002. Copy RAM nội dung to lớn flash:

wasp> cp.b 0x80000000 0x9f020000 0x3c00003. Set up the boot

wasp> bootm 0x9f020000## Booting image at 9f020000 ...Uncompressing Kernel Image ... OKStarting kernel ...4. Done.


As most other current TP-Link routers this device can be flashed và debricked without serial access. Basically, the procedure is as follows:


Set your PC to lớn use the static IP address 192.168.0.66 (the router will have sầu 192.168.0.86 or 192.168.0.2 for v13)