INSTALLING WINDOWS 10

Fix Windows Cannot Be Installed to Drive sầu 0: If you are trying to install Windows 10 or Windows 8 on your PC chances are you may receive the error message “Windows cannot be installed to lớn disk # partition #”. Also, if you continue further and clichồng Next, you will again receive another error message “Windows was unable to install lớn the selected location” and the installation will exit. In short, you won’t be able to install Windows because of this error message.

Bạn đang xem: Installing windows 10


*

Now the hard drive has two different partitioning system namely MBR (Master Boot Record) & GPT (GUID Partition Table ). In order lớn install your Windows on the hard disk, the correct partition system must be selected beforeh&, for example, if your computer boots into Legacy BIOS then the MBR partition system should be used & if it boots into lớn UEFI mode then the GPT partition system should be used. So without wasting any time let’s see how lớn actually Fix Windows Cannot Be Installed to lớn Drive sầu 0 error with help of below-listed troubleshooting guide.


SOLVED: Windows Cannot Be Installed to lớn Drive sầu 0

Method 1: Change the Boot option

1.Turn off your máy tính, then turn it on & simultaneously press F2, DEL or F12 (depending on your manufacturer) lớn enter into BIOS thiết lập.


*

2.Under BIOS thiết lập tìm kiếm for Boot options & then look for UEFI/BIOS Boot mode.

3.Now select either Legacy or UEFI depending on your hard drive sầu. If you have sầu a GPT partition select UEFI & if you have sầu MBR partition select Legacy BIOS.

4.Save changes and then exit BIOS.


Method 2: Convert GPT to lớn MBR

Note: This will erase all the data on your hard drive sầu, backup your data before continuing with this step.

1.Boot from installation truyền thông media và then clichồng Install.

Xem thêm: Cách Để Xóa Ảnh Đại Diện Trên Win 10 (Kèm Ảnh), Thay Đổi Ảnh Tài Khoản Của Bạn


2.Now on the next screen press Shift + F10 lớn open Comm& Prompt.

3.Type the following command inkhổng lồ cmd & hit Enter after each one:


diskpart menu diskselect disk 0 (Note: Change the number 0 according to the disk you want to convert)convert mbrexit

4.Now the disk will be converted to lớn MBR partition and you can continue with the installation.

Method 3: Completely Easre the partition

Note: Make sure lớn backup all your data before continuing as this will completely erase all your data.

1.Boot from installation truyền thông & then click Install.


2.Now on the next screen press Shift + F10 lớn open Comm& Prompt.

3.Type the following commvà & hit Enter after each one:

diskpart list diskselect disk 0 (Note: Change the number 0 according khổng lồ the disk you want khổng lồ convert)cleanexit

4.This will erase all the data & then you can continue with the installation.

Recommended for you:

That’s it you have sầu successfully Fix Windows Cannot Be Installed to Drive 0 but if you still have any questions regarding this guide then feel không lấy phí to lớn ask them in the comment’s section.


*

Aditya FarradAditya is a self-motivated information giải pháp công nghệ professional and has been a công nghệ writer for the last 7 years. He covers Internet services, Smartphone, Windows, software, & How-to guides.


Leave a Reply Cancel reply

Your tin nhắn address will not be published. Required fields are marked *